PT. Artha Intilestari
Head Office:
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.
Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089
Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309
Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.
Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089
Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309
Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753
021 5631149-50
021 56975420
021 56975420
089654260311
021 5631151
Category Solution
Graphtec CSX 550The scanning accuracy may vary depending on the operating environment and the quality or thickness of the scanned document. The accuracy figures above were measured under the conditions described below.
· Test chart used: Mylar sheet #300, 841 mm x 1,189 mm
· Guaranteed accuracy condition: Temperature 20 +/-3deg.C ; Humidity 60+/-10%R.H.
· Guaranteed scanning accuracy range: Width 800 mm Length 1,000 mm
· Optical resolution: 600dpi High-quality (Gray)
· Test chart used: Mylar sheet #300, 841 mm x 1,189 mm
· Guaranteed accuracy condition: Temperature 20 +/-3deg.C ; Humidity 60+/-10%R.H.
· Guaranteed scanning accuracy range: Width 800 mm Length 1,000 mm
· Optical resolution: 600dpi High-quality (Gray)
PLS6.150DThe PLS6.150D is a free-standing platform with a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³) that supports dual lasers. As a dual laser platform, the PLS6.150 can support up to two 10.6µm CO2 lasers with a power range of 10 watts to 150 watts. Additionally, it can support a single 9.3µm CO2 of 30, 50 or 75 watts. (if a 9.3µm CO2 laser is installed, only one 10.6µm CO2 of up to 75 watts may be installed at the same time.)
PLS6.75The PLS6.75 is a free-standing platform with a material processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³). The single laser platform supports either one 10.6µm CO2 laser (10 to 75 watts) or one 9.3µm CO2 laser (30, 50, or 75 watts).
PLS4.75The PLS4.75 is a free-standing platform with a materials processing envelope of 24" x 18" x 9" or 3,888 in³ (610 x 457 x 229 mm or 63,713 cm³). The single laser platform supports either one 10.6µm CO2 laser (10 to 75 watts) or one 9.3µm CO2 laser (30, 50, or 75 watts).