logo

ARTHA INTILESTARI

Home

Category Solution

PLS6MW MultiWavelengthPLS6MW (Multi-Wavelength)
The PLS6MW (Multi-Wavelength) is a free-standing platform uses multiple laser wavelengths to process the broadest possible spectrum of materials and supports either CO2 or fiber lasers. The PLS6MW has a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³). With Universal’s Rapid Reconfiguration technology, any one of the following lasers can be used: one 10.6µm CO2 laser (available from 10 to 75 watts); one 9.3µm CO2 laser (available in 30, 50 or 75 watts); one 1.06µm fiber laser (available in 40 and 50 watts).
Classic CNC Router Classic CNC Router
Classic CNC Router – An Economical Cutting Solution

Need to make cuts that focus on value, performance, and cost-effectiveness? That’s where the Classic Series CNC router comes in. Lower horsepower (3 HP), cutting speed (600 IPM), and rapid traverse (850) means the Classic Series knocks projects requiring finer cuts out of the park.

You’ll use it to work on non-porous and composite materials and wood. You may use it to make new cabinets, work with acrylic, aluminum, aerospace, or 3-D carving projects. Like other MultiCam products, it has a durable steel-frame. The frame’s steel construction also means it eliminates vibration, which helps keep your cut nice and smooth.
3000 Series CNC router3000 Series CNC router
Our 3000 Series CNC router has a gentler touch than our high-power 7000 and 5000 Series. That’s what makes this series effective for cutting foam, composite materials, and marine fabrication. Up to 13 horsepower means it still has all the power you need to cut quickly and efficiently.

A high cut speed of 1,400 IPM and rapid traverse of 2,500 means no time is wasted when the 3000 Series cuts and moves. And you still get consistently high accuracy with each cut because the 3000 Series CNC router comes with a repeatability of 1/1000th of an inch!
5000 Series CNC Router5000 Series CNC Router
5000 Series CNC Router – Maximize Production and Maintain Quality

The 5000 Series is our mid-size CNC router. With a 1,800 IPM cut speed, you get a fast and efficient cut. A 3,000 IPM rapid traverse means this router moves quickly enough to keep your productivity high. And, with a consistently repeatability of just 1/1000th of an inch, your cutting accuracy always stays high too.
7000 Series CNC Router7000 Series CNC Router
7000 Series CNC Router – Precise and Swift Throughput

The 7000 Series CNC router comes with a lot of horsepower to get your cutting done – up to 20 horsepower. Featuring a work area that ranges from 5’ x 5’ on the small end to 10’ by 50’, you have the ability to get a job of any size done. The 7000 series also features one of our fastest cutting speeds at 2,200 IPM, so you can get your job as efficiently as possible.
Header Contact Information
PT. Artha Intilestari
Head Office:
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.

Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089

Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309

Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753


021 5631149-50
021 56975420
089654260311
021 5631151

cs@arthainti.com

Image 1
Image 2
Image 3
Page Logo Image
Head Office:
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.

Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089

Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309

Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753


Tel : 021 5631149-50
021 56975420
Hp : 089654260311
Fax : 021 5631151
Email : cs@arthainti.com
Social Media
© Copyright 2018 - Artha Intilestari. All rights reserved
Jasa Pembuatan Website by IKT
Switch to Desktop Version