PT. Artha Intilestari
Head Office:
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.
Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089
Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309
Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.
Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089
Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309
Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753
021 5631149-50
021 56975420
021 56975420
089654260311
021 5631151
CNC & Laser Solution
Classic CNC Router Classic CNC Router – An Economical Cutting Solution
Need to make cuts that focus on value, performance, and cost-effectiveness? That’s where the Classic Series CNC router comes in. Lower horsepower (3 HP), cutting speed (600 IPM), and rapid traverse (850) means the Classic Series knocks projects requiring finer cuts out of the park.
You’ll use it to work on non-porous and composite materials and wood. You may use it to make new cabinets, work with acrylic, aluminum, aerospace, or 3-D carving projects. Like other MultiCam products, it has a durable steel-frame. The frame’s steel construction also means it eliminates vibration, which helps keep your cut nice and smooth.
Need to make cuts that focus on value, performance, and cost-effectiveness? That’s where the Classic Series CNC router comes in. Lower horsepower (3 HP), cutting speed (600 IPM), and rapid traverse (850) means the Classic Series knocks projects requiring finer cuts out of the park.
You’ll use it to work on non-porous and composite materials and wood. You may use it to make new cabinets, work with acrylic, aluminum, aerospace, or 3-D carving projects. Like other MultiCam products, it has a durable steel-frame. The frame’s steel construction also means it eliminates vibration, which helps keep your cut nice and smooth.
PLS6MW (Multi-Wavelength)The PLS6MW (Multi-Wavelength) is a free-standing platform uses multiple laser wavelengths to process the broadest possible spectrum of materials and supports either CO2 or fiber lasers. The PLS6MW has a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³). With Universal’s Rapid Reconfiguration technology, any one of the following lasers can be used: one 10.6µm CO2 laser (available from 10 to 75 watts); one 9.3µm CO2 laser (available in 30, 50 or 75 watts); one 1.06µm fiber laser (available in 40 and 50 watts).
ILS9.75The ILS9.75 is a free-standing platform with a materials processing envelope of 36” x 24” x 12” or 10,368 in³ (914 x 610 x 305 mm or 169,901 cm³). The single laser platform supports either one 10.6µm CO2 laser (10 to 75 watts) or one 9.3µm CO2 laser (30, 50, or 75 watts).
ILS9.150DThe ILS9.150D is a free-standing platform with a materials processing envelope of 36” x 24” x 12” or 10,368 in³ (914 x 610 x 305 mm or 169,901 cm³). The dual laser platform supports a power range of 10 to 150 watts (up to 75 watts with one 10.6µm CO2 laser; up to 150 watts with a second 10.6µm CO2 laser).
The ILS9.150D also supports a single 9.3µm laser at 30, 50 or 75 watts (If a 9.3µm CO2 laser is installed, the maximum 10.6µm laser is 75 watts).
The ILS9.150D also supports a single 9.3µm laser at 30, 50 or 75 watts (If a 9.3µm CO2 laser is installed, the maximum 10.6µm laser is 75 watts).
ILS12.75The ILS12.75 is a free-standing platform with a materials processing envelope of 48" x 24" x 12" or 13,824 in³ (1219mm x 610mm x 305mm or 226,795 cm³). The single laser platform supports either one 10.6µm CO2 laser (10 to 75 watts) or one 9.3µm CO2 laser (30, 50 or 75 watts).